GAS FURNACE $ 79.95

• Confirm system operation and cycle through thermostat
• Measure supply and return air temperature
• Clean and level thermostat
• Verify proper exhaust
• Compare voltage and amp. draw on all motors to rating
• Lubricate fan motor and bearings (when possible)
• Align blower belt
• Adjust belts for proper tension
• Remove “Squirrel” cage fan and clean
• Remove pilot assembly and clean thoroughly
• Test ignition or pilot safety switch for operation
• Test door safety switch
• Remove burners form heat exchanger and clean thoroughly
• Adjust burner manifolds for proper combustion
• Vacuum inside heat exchanger compartment
• Inspect heat exchanger for cracks, holes and leaks
• Test operation of high limit fan control
• Examine all wiring and electrical connections, repair, cap or tape loose wiring as necessary
• Re-check supply and return temperature for improvement and proper operation